Ny Kyosho 4WD 1/10 buggy.

For år tilbage var der faktisk kun Kyosho, der lavede en konkurence 4WD buggy. Der er nu lavet om på. Men Kyosho er færdig med klassen. De har netop sendt billeder ud af deres nye buggy.

Der er masser af nye design ændringer i forhånd til den gamle.

Part Number # 30048B
Kommer på markedet i November.
Prisen er ukendt, men sikkert ikke billig. 

Det bliver spændende om nogle danske kørere vil prøve kræfter med denne bil.
New features:

1.) New Front Short gull-arm suspension allowing more grip: 2mm shorter and more durable. Front and rear are now both gull-arm type.

2.) Updated Front knuckle : Updated hole location.

3.) New front hub carrier : Bush insert adjustable – 7, 10, 13 degrees

4.) New Wide front suspension holder(both front and rear side)

5.) New rear upper bulkhead : The hole locations have been lowered for high grip surfaces.

6.) New wide rear suspension holder(Just rear side)

7.) New chassis : .7075 hard anodized aluminum chassis. 5mm thinner(2.5/2.0mm) allowing lighter weight with improved flex balance. October 2018

8.) New chassis brace : Low profile chassis brace bar which sits on top of the chassis allowing improved flex balance. Tuning options will be available.

9.) New floating steering servo mount

10.) New Body Shell : New body with center fins

11.) Front and rear gear diffs with new center slipper clutch. This setup is well balanced and will work well with high grip surfaces.

12.) (Optional) Front lower shock tower

13.) New revised ackerman with more steering on the outer wheel.

14.) Wing and wing stay from the RB7

15.) Rear gullwing arm from the RB7

16.) Shock pistons : 2×1.6 for the front and 2×1.7 for the rear

17.) Shock caps from the RB7

18.) 74mm universal swing shafts for the front

19.) Joint rings for the universal swing shafts

Related posts